Need help?Do you have a question about the Toro TEMPUS Series and is the answer not in the manual?
General| Model | TEMPUS Series |
|---|---|
| Mounting | Indoor/Outdoor |
| Cycle+Soak | Yes |
| Master Valve/Pump Start | Yes |
| Output Voltage | 24 VAC |
| Number of Stations | 4, 6, 8, 12, 16 |
| Zones | 4, 6, 8, 12 |
| Stations | 4, 6, 8, 12, 16 |
| Connectivity | Wi-Fi |
| Power Source | 24V AC |
| Weather Sensing | Yes |
| Mobile App | Yes |
| Water Budget | Yes |
| Seasonal Adjust | Yes |
| Sensor Input | Yes |
| Operating Temperature | -40°C to 60°C |
Describes the modular solution and lists various TEMPUS irrigation controller back models.
Covers 24-hour time retention, short circuit detection, electric test, RAIN delay, and Wi-Fi readiness.
Explains the procedure for connecting sprinkler valve wires to the appropriate terminals on the Back Module.
Guides on connecting a pump start relay to the controller's MV terminal, including necessary cautions.
Explains how to connect the transformer cable to the 24 VAC terminals and plug into the power source.
Provides guidance on selecting a suitable installation site and securely mounting the Back Module.
Guides the user through installing and connecting a rain sensor to the controller's sensor terminals.
Instructs on how to physically connect the Programming Module to the Back Module by aligning and pressing.
Step-by-step guide to setting the current time and date using the controller's interface.
Explains how to set watering schedules based on a day interval cycle, specifying days left before watering.
Instructions for setting watering days using a weekly calendar format, marking days as active or inactive.
Guide to setting watering days based on odd or even numbered days of the month for watering.
To Next Page
