20
Test Mode
Selecting this function enables you to run a quick temporary watering program to
test the operation of each watering station or to test the operation of each electrical
line to the valve solenoid. Starting a Test stops any running watering cycle or manual
station operations.
1. Press the Test
button.
2. Press either the
or button to select the desired test: VALVE TEST or
ELECTRIC TEST.
Valve Test (testing the watering stations)
3. Select VALVE TEST.
4. To manually start the Valve Test when currently OFF (the symbol
is o to
indicate the Valve Test’s watering cycle is OFF) press either the
or button
to set the run time from 1 second (0:01
) to 8 minutes (8:00 ) and press
the Start/Stop
button. The symbol is turned on to indicate the Valve
Test’s watering cycle is ON.
5. To manually terminate the Valve Test’s watering cycle when currently ON (the
symbol
is on to indicate the Valve Test’s watering cycle is ON), press the
Start/Stop
button. The symbol is turned o to indicate the watering cycle
is OFF.
Electric Test (testing the electrical line to the valve solenoids)
6. Select ELECTRIC TEST.
7. To manually start the Electric Test press the Start/Stop
button. The test starts
and ends automatically.
8. Press either the
or button to view the status of each line:
• OPEN
• SHORTED
• Current value in mA
9. Press the Auto
button when finished.
Pause or set to OFF the TEMPUS
Controller
This feature enables all automatic watering operations to be delayed from 1 to 31
days or to be turned to OFF. The OFF condition is indicated as PAUSED with no number
of paused days show.
To set the TEMPUS Controller to Pause or OFF:
1. Press the Pause
button.
2. Press either the
or button to select the desired number of days from 1 to
31 or to select OFF (PAUSED). When in Pause or in OFF the
symbol is turned on.
3. Press the Auto button when finished.
To remove the TEMPUS Controller from Pause or OFF:
4. Press the Auto button and then the Pause button
HELP Function
TEMPUS Controller has an HELP feature that provide instant help for the current
function.
• Press and keep it pressed the the HELP
button to start viewing the help text
on the display. NOTE: the help text repeat itself as long as the HELP
butoon is
pressed.
• Release the HELP
button when finished.
Note: when in SETTINGS the help suggests to check this User Guide.
Toro TEMPUS Controller 4
_
6
_
8
CONTROL OPERATIONS
To Next Page
Loading...
Need help?
General
