Need help?Do you have a question about the Toro DDC Series and is the answer not in the manual?
General| Rain Sensor Compatibility | Yes |
|---|---|
| Master Valve/Pump Start | Yes |
| Output Voltage | 24 VAC |
| Application | Residential/Commercial |
| Stations | 4, 6 |
| Enclosure | Weatherproof |
| Water Budget | Adjustable |
| Maximum Load Current | 0.5A per station |
| Operating Temperature | 140°F (-40°C to 60°C) |
| Enclosure Rating | NEMA 3R |
Details on connecting solenoids, common terminal, transformer, and battery. Notes on power.
Procedure for connecting a rain sensor and how it suspends irrigation.
Instructions for setting the current year, month, day, and time on the controller.
Guide to setting run times for stations within programs A, B, and C, including master valve.
Details on selecting watering days using CAL, Interval, Odd, or Even day options.
Procedure for setting up to three start times per day for each program.
How to adjust run times by percentage for seasonal watering needs.
Instructions for manually operating individual stations or sequences.
Enabling immediate start of a selected program without affecting scheduled run times.
Options to suspend all programs or set a rain delay for a specified period.
Procedure to erase all program information for a selected program.
Reviewing controller operation, status, and program data.
Detecting and responding to short circuits in solenoids or wiring.
Information on memory retention, battery backup, and power failure indication.
Details on input power requirements and station output power ratings.
Template for planning watering schedules for programs A, B, and C.
Information regarding FCC compliance and potential interference issues.
To Next Page