To Next PageTo Next Page
Need help?Do you have a question about the Toro Network VP 4.00 Satellite and is the answer not in the manual?
General| Brand | Toro |
|---|---|
| Model | Network VP 4.00 Satellite |
| Category | Controller |
| Language | English |
Satellite operates under central computer management, allowing program downloads and edits.
Satellite executes downloaded programs; central can edit time/date but not programs.
Satellite executes no watering operations; any current watering terminates.
Selects the satellite mode of operation: Central, Local, or Off.
Suspends satellite operation and chooses the suspension duration.
Suspends operation and cancels current watering due to rain.
Resets all satellite irrigation programs to their default settings.
Resets all station settings to their default values.
Resets all satellite settings, programs, and configuration values.
Resets all disabled stations and clears related alarms.
Resets electrical current values for all stations.
Selects the station to edit, from Station 01 up to the satellite's maximum station count.
Adjusts station operation percentage, from 0% to 900%.
Displays total scheduled station runtime for the current irrigation day.
Displays total station runtime that occurred for the current irrigation day.
Displays total station runtime that occurred for the previous irrigation day.
Disables station operation, clearing alarms related to current conditions.
Delays station operation for a specified duration (01-30 days, Permanent, None).
Assigns station to a switch; master valve/pump won't actuate when switch is active.
Adds start times without increasing runtime, dividing runtime by cycle value.
Activates stations with one start time daily, specifying duration and simultaneous stations.
Activates stations with up to 24 start times and 2-week calendar scheduling.
Activates stations for runtime, repeating cycles after specified delay between start/end times.
Activates up to 64 Sequences with 6 stations per sequence, 5-day schedule.
Utilizes station-based flow management downloaded from SitePro.
Guides manual station activation for groups of stations with specified runtime and limits.
Provides directions for fine-tuning irrigation programs using percent adjust.
Monitors communication network traffic.
Monitors all satellites in the system.
Displays satellite firmware version and creation date.
Displays detected stations, sensors, and power-up/down times.
Activates all stations sequentially with user-defined time durations.
Tests individual stations by selecting and running them.
