Need help?Do you have a question about the Toro EVOLUTION Series and is the answer not in the manual?
General| Weather Sensor Compatibility | Yes |
|---|---|
| Output Voltage | 24 VAC |
| Display | LCD |
| Wi-Fi Connectivity | Yes (with optional Wi-Fi module) |
| Mounting | Indoor/Outdoor |
| Maximum Load Current | 0.5 amps per station |
| Operating Temperature | -40°C to 60°C |
| Enclosure Rating | NEMA 3R |
| Weight | Varies by model |
| Zones | 4 to 16 (in modules of 4) |
Explains the controller's timing mechanism.
Displays the controller's VAC power status and running status.
Shows current time, day, date, and schedule status.
Displays alerts, watering status, or system OK messages.
Allows selection of the display language from a list.
Configures the date display format (MM/DD/YY or DD/MM/YY).
Sets the clock display to 12-Hour or 24-Hour format.
Allows setting the current hour and minute of the controller.
Allows setting the current month, day, and year.
Defines Sunday or Monday as the first day of the week.
Instructions for mounting the controller cabinet using templates and screws.
Details connection for indoor and 240 VAC outdoor models via plug.
Wiring instructions for 110 VAC outdoor models to transformer.
Wiring instructions for 220 VAC outdoor models to terminals.
Steps to install 4-zone or 12-zone expansion modules into the controller.
Steps to safely remove an expansion module from the controller.
Step-by-step guide to set the controller's current time and date.
How to switch between U.S. and international time/date formats.
Defines how to set watering days using 7-day, Odd, Even, or Interval options.
Sets the start times for schedules, allowing up to four starts per schedule.
How to manually start a pre-programmed watering schedule.
Manually runs a single zone for a specified duration.
Tests all active zones sequentially for a set duration.
Immediately stops all active watering schedules and zones.
Suspends watering for a set number of days or until next scheduled start.
Sets runtimes for zones within different schedules (A, B, C).
Configures cycle, soak times, and master valve settings for each zone.
Sets the number of concurrently active schedules.
Activates watering on all seven days of the week.
Activates watering on odd-numbered days of the month.
Activates watering on even-numbered days of the month.
Sets watering to occur every Nth day.
Defines specific days when watering is not allowed.
Defines specific time windows on restricted days when watering is not allowed.
Instructions for updating the controller's software via USB.
Resets the controller to its original factory default settings.
Displays system faults and allows clearing of detected system faults.
How to clear individual alerts or all detected system faults.
Information on accessing local distributor or dealer contact details.
How to find Toro's general contact information and website.
Guide to setting the controller's time and date.
Steps to enter the menu for customizing controller settings.
Selects the user interface display language.
Adjusts the screen contrast for better readability.
Configures the clock display between 12-hour and 24-hour formats.
Configures the date display format (MM/DD/YY or DD/MM/YY).
Sets Sunday or Monday as the start of the week.
Physical dimensions of the controller's cabinet.
Electrical input and output details for North America and Europe/Australia.
FCC compliance information and radio frequency energy guidelines.
Phone numbers and website for US and global support.
To Next Page
