Toro TIMECUTTER 74685 - Page 170

HydroTransaxleInstallation(continued)
g302073
Figure243
2.Install,butdonottighten,the4(1/2inch)boltsandnuts,3(5/8inch)bolts,
and11/16inchnutsecuringthetransaxletothechassis.Seetorque
sequencebelow.
A.Torquethe(5/8inch)frontinnermountingboltand(11/16inch)nuttothe
framebracketto67.5–74.5N•m(50–55ft-lb).
B.Torquethe2(5/8inch)bottommountingboltsand(11/16inch)nutsto
thecrossplateto67.5–74.5N•m(50–55ft-lb).
C.T orquethe2(1/2inch)frontandrearmid-mountingboltsandnutstothe
chassisto22.5–25N•m(200–225in-lb).
D.T orquethe2(1/2inch)axlemountingboltsandnutstotheframebracket
to22.5–25N•m(200–225in-lb).
g302071
Figure244
HydrostaticDriveSystem:ServiceandRepairs
Page6–16
TIMECUTTER®ServiceManual
3433-938RevA