Toro TIMECUTTER 74685 - Page 77

FuelTankInstallation(continued)
g301705
Figure76
2.Removethecapfromthehoses.Installthefuelhoseandfuelventhoseto
thefueltankttings.Securewithspringclamps.
Note:Thefuelhoseandfuelventhoseportsandhoseorientationare
labeledonthefueltank.
g301704
Figure77
3.RemovethefuelcapfromtheLHpod.
4.InstalltheLHpodintopositiononthemachine.
5.Movethemotioncontrolfromtheneutralpositiontotheneutrallock.
6.InstallthefuelcapontheLHsidepod.
7.Installthe3screws(perpod)securingthepodtothepodsupportbrackets.
Torquescrewsto11N•m(100in-lb).
TIMECUTTER®ServiceManual
Page5–27
Chassis:ServiceandRepairs
3433-938RevA