Toro TIMECUTTER 75740 - Chapter 8:Electricalsystem; Service and Repairs

MotionControlandSeatSwitchInstallation(continued)
4.Installthesmartspeedknobtothesmartspeedlever.Handtightenwiththe
screwsecuringthesmartspeedknobtothesmartspeedlever.
g301691
Figure279
5.PlacetheLHpodintopositiononthemachine.
6.Movethemotioncontrolfromtheneutralpositiontotheneutrallockposition.
7.InstallthefuelcapontheLHsidepod.
8.Installthe3screws(perpod)securingthepodtothepodsupportbrackets.
Torquescrewsto11N•m(100in-lb).
9.Fliptheseatbackintoposition.
SeatSwitchTesting
1.DisconnectthewireharnessfromtheOperatorPresenceSwitch(seat
switch),locatedonthebottomoftheseatassembly.
2.Usingadigitalmulti-metersettotheOHMorContinuitysetting,testthe
continuitybetweenthetwoswitchterminals.
•Whentheseatisvacated,theswitchshouldNOThavecontinuity(open)
•Whentheoperatorispresent,theswitchshouldhavecontinuity(closed)
NeutralLockSwitchTesting
Theneutralswitchisasinglepoleplungertypeswitch(normallyopen)with
twoterminals.Whentheplungerisdepressed,thecircuitclosesandthereis
continuitybetweentheterminals.
•MotionControlLeversinneutralparkposition(OUT),theswitchshouldhave
continuity(closed)
•MotionControlLeversintheoperatingposition(IN),theswitchshouldNOT
havecontinuity(open)
TIMECUTTER®ServiceManual
Page8–11
ElectricalSystem:ServiceandRepairs
3433-938RevA