Step
5
Completing the Setup
Parts needed for this step:
1
Ignition Key
1
Operator’s Manual
1
Engine Operator’s Manual
1
Hose coupling
1
Operator Training Material
Procedure
Checking the Tir e Pr essur e
Chec k the front and rear tires for proper inflation.
R efer to Chec king the Tire Pressure in the Operator’ s
Manual for the recommended inflation pressure .
Checking the Mo w er Adjustment
T he mo w er dec k w as lev eled at the factor y . If the
mo w er is not cutting lev el, adjust the side-to-side
lev el and the front-to-rear blade slope . See the
Operator’ s Man ual for the proper procedure .
Checking the Side Discharge Chute
R emo v e the pac king restraint holding the side
disc harg e c hute up and lo w er the c hute into place .
Checking the Engine Oil Lev el
Before y ou star t the engine and use the mac hine ,
c hec k the oil lev el in the engine crankcase; refer to
Chec king the Oil Lev el in the Operator’ s Manual .
R eview the R emaining P ar ts
K ee p all the follo wing items with the mac hine:
• Ignition K ey
• Operator’ s Manual
• Engine Operator’ s Manual
• Hose coupling
• View the Operator training material.
5
To Next Page
Loading...
