To Next PageTo Next Page
Need help?Do you have a question about the Toro TimeCutter SS 4260 and is the answer not in the manual?
General| Cutting Width | 42 inches |
|---|---|
| Transmission | Hydrostatic |
| Deck Material | Steel |
| Fuel Capacity | 3 gallons |
| Blades | 2 |
| Deck Type | Fabricated |
| Type | Riding Mower |
| Cutting Height | 1.5 - 4.5 inches |
| Warranty | 3 years |
| Engine | Kohler 7000 Series |
Location and importance of model/serial number identification for the machine.
Guidelines for safe operation and avoiding injury to self and others.
Key operational safety points for the machine, including blade, discharge, and bystanders.
Precautions and guidelines for operating on slopes safely, including angle limits and traction.
Safety warnings related to children around the mower, emphasizing vigilance and exclusion.
Guidelines and requirements for towing with the machine, including hitch and weight limits.
Critical safety warnings and precautions for handling gasoline, emphasizing flammability and explosion risks.
Explains the function and importance of the safety interlock system for preventing unexpected operation.
Step-by-step guide to start the engine correctly, including choke and starter engagement.
Explains zero-turn maneuverability and driving safety, including caution on turns.
Advice for optimal mowing, blade maintenance, and cleaning for better performance and longevity.
Identifies and describes the functions of the main control panel components.
Identifies key components of the 42-inch deck models shown in Figure 4.
Identifies key components of the 50-inch deck models shown in Figure 5.
Explains motion control levers, their speed sensitivity, and the park position for safety.
Details the Smart Speed control lever for selecting between high and low speed ranges.
Operation of ignition switch, throttle, choke control, and blade control switch (PTO).
Provides a schedule for regular maintenance tasks based on operating hours or time intervals.
Procedures for checking, changing engine oil, and replacing the oil filter.
Steps for removing, checking, and installing the spark plug, including gap adjustment.
Procedures for cleaning cooling system and replacing the in-line fuel filter.
Procedures for charging and servicing the battery, and checking fuses.
Procedures for checking tire pressure and releasing the electric brake.
Inspection, sharpening, and replacement of mower blades for optimal cutting performance.
Procedures for side-to-side and front-to-rear deck leveling to ensure even cut.
Inspection and replacement procedures for the mower drive belt.
Steps for cleaning and preparing the machine for storage to prevent damage.
Lists common problems with possible causes and corrective actions for engine and drive issues.
Wiring diagram for the electrical system of the mower, showing component connections.
