Why is my Toro TimeCutter SW 4200 Lawn Mower cutting height uneven?
- JJonathan GomezSep 3, 2025
Uneven cutting height with your Toro Lawn Mower can be due to several reasons. The blade(s) might not be sharp, so sharpen them. A cutting blade(s) may be bent, so install a new cutting blade(s). Ensure the mower is level from side-to-side and front-to-rear. Check that the anti-scalp wheel is set correctly and adjust its height if needed. A dirty mower underside can also cause this, so clean it. Finally, verify that the tire pressure is correct and adjust it accordingly. If a blade spindle is bent, it is recommended to contact an Authorized Service Dealer.











