Toro TimeCutter SW 5000 - User Manual

FormNo.3393-656RevA
TimeCutter
®
SW4200orSW5000
RidingMower
ModelNo.74675—SerialNo.315000001andUp
ModelNo.74680—SerialNo.315000001andUp
g027698
Registeratwww.Toro.com.
OriginalInstructions(EN)
*3393-656*A

Toro TimeCutter SW 5000 Specifications

General

Brand	Toro
Model	TimeCutter SW 5000
Category	Lawn Mower
Language	English

Summary

Introduction

Gross Horsepower

Engine horsepower rating according to SAE J1940 standards.

Safety Alert Symbol

Identification of the safety alert symbol for hazard warnings.

Safety

Safe Operating Practices

Guidelines for safe operation, including training and preparation.

Preparation

Steps to take before operating the mower for safety.

Operation

Key safety precautions during mower operation.

Safety

Maintenance and Storage

Safety procedures for maintenance, cleaning, and storage.

Hauling

Safety precautions for transporting the machine.

Toro Mower Safety

General Operation

General safety rules for operating the mower.

Slope Operation

Precautions and advice for operating the mower on slopes.

Towing Safety

Safety guidelines for towing equipment with the mower.

Model Specifications

Model 74675 Data

Sound pressure, sound power, and vibration data.

Model 74680 Data

Sound pressure, sound power, and vibration data.

Slope Indicator

Slope Chart

Chart to determine the degree of slope for safe operation.

Vertical Surface Alignment

Aligning edge with a vertical surface for slope comparison.

Slope Comparison Example

Example of comparing slope with a folded edge.

Safety and Instructional Decals

Decal 93-7009

Warning about operating without deflector; stay away from moving parts.

Decals for Maintenance Schedule

Instructions for servicing, tire pressure, and greasing.

Decals for Hazard Warnings

Thrown object and cutting/dismemberment hazard warnings.

Decals

Height-of-Cut Decal (112-9840)

Shows height-of-cut settings and reading the operator's manual.

Entanglement Hazard Decal (114-1606)

Warning about entanglement hazard with belts; keep guards in place.

Height-of-Cut Decal (120-5469)

Height-of-cut settings for certain models.

Control Panel Symbols

Battery Safety and Handling Symbols

Symbols for battery hazards, handling, and warnings.

Drive Control and Operational Symbols

Symbols for drive controls, oil drain, and system references.

Mowing System Symbols

Key Choice and Smart Park System Symbols

Symbols for Key Choice and Smart Park brake system operation.

Drawbar Pull Limit Symbol

Symbol indicating the maximum drawbar pull limit.

General Safety Symbols

Warning - Read Operators Manual

General warning to read the operator's manual.

Cutting;Pinching Hazard

Warning for cutting/pinching hazard of hand, foot, or belt.

Bodily Harm Hazard - No Riders

Hazard warning against having riders; look behind when backing up.

Control Panel Layout

Throttle Settings (Fast, Variable, Slow)

Indicates throttle settings for engine speed control.

Choke Control

Symbol for the choke control for starting cold engines.

Power Take-Off (PTO) Switch

Switch to engage/disengage mower blades and attachments.

Product Overview and Controls

Mower Component and Control Panel Identification

Diagrams identifying mower components and control panel layout.

Control Operations

Explanation of ignition, choke, throttle, blade, fuel, and height controls.

Operation

Key Choice Switch Function

How to use the Key Choice switch for mowing in reverse.

Operating-in-Reverse Warning Light

Explanation of the warning light for reverse operation.

SmartPark Switch Function

How the SmartPark switch engages and disengages the parking brake.

Operation

DANGER: Gasoline Hazards

Critical warnings about fire and explosion risks with gasoline.

WARNING: Gasoline Exposure

Warnings about health risks from gasoline exposure.

Using Stabilizer;Conditioner

Benefits and instructions for using fuel stabilizer/conditioner.

Think Safety First

Operating Safety

General safety instructions and decal information for safe operation.

DANGER: Slope Hazards

Dangers of mowing on wet grass or steep slopes, and rollovers.

CAUTION: Noise Levels

Caution about noise levels and recommendation for hearing protection.

Understanding the Safety-interlock System

WARNING: Interlock System Tampering

Warning against tampering with safety interlock switches.

Safety-Interlock System Design

Explanation of the system's purpose and design.

Testing the Safety-interlock System

Step-by-step procedure to test all safety interlocks.

Starting and Operating Controls

Starting the Engine

Procedure and important notes for starting the engine.

Operating Mower Blades

How to engage and disengage the mower blades.

Operating the Parking Brake

How to engage and disengage the SmartPark™ parking brake.

Stopping the Engine

Engine Shutdown Procedure

Steps to properly stop the engine.

Driving the Machine

Machine Characteristics

Description of the mower's driving characteristics.

WARNING: Rapid Spinning

Warning about the machine's rapid spinning and loss of control.

Driving Forward or Backward

Procedure for driving the machine forward and backward.

Stopping the Machine

WARNING: Unattended Mower

Warning about leaving the mower unattended.

Mowing in Reverse

DANGER: Mowing in Reverse

Danger of backing over someone while blades are engaged.

Procedure for Mowing in Reverse

Steps to safely mow in reverse if necessary.

Adjusting the Height-of-Cut

Figure 14: Height-of-Cut Settings

Diagram showing height-of-cut adjustment positions.

Operator Position and Deck Adjustments

Positioning the Seat and Steering Wheel

How to adjust the seat and steering wheel for comfort and control.

Adjusting Anti-scalp Rollers (42-inch Decks)

Procedure for adjusting anti-scalp rollers on 42-inch mower decks.

Adjusting Anti-scalp Rollers (50-inch Decks)

Procedure for adjusting anti-scalp rollers on 50-inch mower decks.

Pushing the Machine by Hand

Important: Pushing Safety

Important safety advice for pushing the machine by hand.

Pushing the Machine Procedure

Steps to push the machine by hand, including brake release.

Converting to Side Discharge (for models with 107 cm (42-inch) decks)

Removing the Discharge Cover for the Side Discharge

Steps to remove the discharge cover for side discharge.

Figure 20: Discharge Cover Removal

Diagram for removing the discharge cover.

Installing the Discharge Cover for Mulching

Steps to install the discharge cover for mulching.

Converting to Side Discharge (for models with 127 cm (50-inch) decks)

Removing the Right Baffle for Side Discharge

Steps to remove the right baffle for side discharge.

Figure 23: Baffle Stud and Knob

Diagram of baffle stud and knob components.

Converting to Side Discharge (for models with 127 cm (50-inch) decks)

WARNING: Open Holes

Warning about severe injury from thrown objects through open holes.

Installing the Right Baffle for Mulching

Steps to install the right baffle for mulching.

Figure 25: Cutoff Baffle Installation

Diagram for installing the cutoff baffle.

Transporting the Machine

WARNING: Roadway Driving

Warning against driving the mower on public streets or roadways.

Transport Procedure

Steps for transporting the machine on a trailer or truck.

Loading the Machine

Important: Ramp Usage

Important advice on using ramps for loading.

Figure 27: Loading;Unloading Ramps

Diagram illustrating ramp usage for loading/unloading.

Loading the Machine

WARNING: Loading Hazards

Warnings about tip-over risks and serious injury during loading.

Figure 28: Ramp Angle and Length

Diagram showing ramp angle and length requirements.

Operating Tips

Using the Fast Throttle Setting

Recommendation to use the fast throttle for mowing.

Cutting a Lawn for the First Time

Advice for cutting grass for the first time.

Cutting 1;3 of the Grass Blade

Guideline for optimal grass cutting amount.

Mowing Direction

Advice on alternating mowing direction.

Maintenance

Recommended Maintenance Schedule(s)

Schedule for routine maintenance tasks based on operating hours.

CAUTION: Ignition Key

Caution about leaving the key in the ignition switch.

Premaintenance Procedures

Raising the Seat

How to raise the seat to access components.

Releasing the Mower-Deck Curtain

How to loosen the mower-deck curtain for access.

Raising the Front of the Machine

Procedure for safely raising the front of the machine.

Lubrication

Greasing the Bearings

Procedure for greasing bearings at specified intervals.

Servicing the Air Cleaner

Procedure for servicing the air cleaner elements.

Engine Maintenance

Servicing the Foam Element

Instructions for cleaning and replacing the foam air filter element.

Servicing the Paper Element

Instructions for servicing and replacing the paper air filter element.

Checking the Engine-Oil Level

Procedure for checking engine oil level before each use.

Servicing the Engine Oil

Figure 36: Oil Fill and Dipstick

Diagram showing oil fill cap and dipstick area.

Changing the Engine Oil

Procedure for changing the engine oil.

Changing the Engine-Oil Filter

Service Interval for Oil Filter

Schedule for changing the engine oil filter.

Figure 39: Engine Oil Filter Change

Diagram showing how to change the engine oil filter.

Servicing the Spark Plug

Spark Plug Service Interval

Schedule for checking and replacing spark plugs.

Servicing the Spark Plug

Spark Plug Type and Air Gap

Specifications for spark plug type and air gap.

Removing the Spark Plug

Procedure for removing the spark plug.

Figure 41: Spark Plug Check

Diagram showing how to check the spark plug gap.

Cleaning the Cooling System

Cooling System Cleaning Procedure

Steps to clean the engine's cooling system.

Fuel System Maintenance

DANGER: Gasoline Hazards

Critical warnings about fire and explosion risks with gasoline.

Replacing the In-Line Fuel Filter

Procedure for replacing the in-line fuel filter.

Electrical System Maintenance

WARNING: California Proposition 65

Warning about lead and lead compounds in battery components.

Charging the Battery

Procedure for charging the battery.

Removing the Battery

Steps to safely remove the battery from the machine.

Electrical System Maintenance

Installing the Battery

Steps to safely install the battery into the machine.

Servicing the Fuses

Information about fuses and how to replace them.

Drive System Maintenance

Checking the Tire Pressure

Procedure for checking and maintaining proper tire pressure.

Releasing the Electric Brake

Procedure to manually release the electric brake.

Mower Maintenance

Servicing the Cutting Blades

Guidelines for maintaining sharp and undamaged mower blades.

WARNING: Damaged Blade Hazard

Warning about risks associated with worn or damaged blades.

Checking for Bent Blades

Figure 51: Measuring Blade Distance (A)

Diagram for measuring blade distance from surface (A).

Figure 52: Rotating Blade for Measurement

Diagram showing blade rotation for measurement.

Removing the Blades

Blade Replacement Criteria

Conditions that require blade replacement.

Procedure for Removing Blades

Steps to remove mower blades.

Sharpening the Blades

Important: Blade Orientation

Important note on the correct orientation of the blade's curved part.

Blade Sharpening Procedure

Steps for sharpening mower blades.

Installing the Blades

Procedure for Installing Blades

Steps to install mower blades.

Blade Bolt Torque Specification

Torque specification for the blade bolt.

Leveling the Mower Deck

Deck Leveling Requirements

Requirements for leveling the mower deck.

Side-to-Side Leveling

Procedure for adjusting the mower deck side-to-side.

Adjusting the Front-to-Rear Blade Slope

Front-to-Rear Slope Adjustment Procedure

Steps to adjust the front-to-rear slope of the mower deck.

Figure 60: Front-to-Rear Slope (2 Blades)

Diagram for front-to-rear slope on 2-blade decks.

Removing the Mower

Procedure for Removing the Mower

Steps to remove the mower deck from the machine.

Figure 63: Front Support Rod Removal

Diagram for removing the front support rod.

Replacing the Grass Deflector

WARNING: Uncovered Discharge Opening

Warning about injury risks from uncovered discharge opening.

Grass Deflector Inspection

Procedure for inspecting the grass deflector for damage.

Mower Belt Maintenance

Inspecting the Belts

Procedure for inspecting mower belts for wear or cracks.

Replacing the Mower Belt

Procedure for replacing the mower belt.

Replacing the Mower Belt

Figure 66: Belt Routing (2 Blades)

Diagram showing belt routing for 2-blade mower decks.

Figure 67: Belt Routing (3 Blades)

Diagram showing belt routing for 3-blade mower decks.

Cleaning

Cleaning Under the Front of the Machine

Procedure for cleaning debris from under the front of the mower.

Washing the Underside of the Mower

Procedure for washing the underside of the mower deck.

Storage

Cleaning and Storage

Detailed steps for cleaning and preparing the machine for storage.

Important: Fuel Stabilizer Storage

Important note on not storing stabilized gasoline over 30 days.

Troubleshooting

Fuel Tank Issues

Troubleshooting for fuel tank collapsing or fuel running out.

Engine Overheating

Troubleshooting for engine overheating problems.

Starter Not Cranking

Troubleshooting for when the starter does not crank.

Troubleshooting

Engine Loses Power

Troubleshooting for when the engine loses power.

Machine Does Not Drive

Troubleshooting for the machine not driving.

Abnormal Vibration

Troubleshooting for abnormal vibration issues.

Schematics

Electrical Diagram (Rev. A)

Wiring diagram for the mower's electrical system.

Wire Color Codes

Legend for wire colors used in the electrical diagram.

International Distributor List

Distributor Information

List of international distributors with contact details.

Privacy Notice

Information Collection and Usage

Details on data collection, usage, retention, security, and access.

Australian Consumer Law

Information relating to Australian Consumer Law.

The Toro Warranty

The Toro GTS Starting Guarantee

Information on the GTS starting guarantee for engines.

Conditions and Products Covered

Details on products covered and warranty periods.

Owner Responsibilities

Owner's responsibilities for maintaining the Toro product.