Toro TimeCutter Z Series User Manual

7 - 10 TimeCutter™ Z Service Manual
MOWER DECKS
7
Use a blade height gauge to measure the blade
height at the front of the center blade and at the
rear of the side blades.
Adjust the front trunion rods until the front blade
tip is 1/16” - 5/16” (1.6 - 7.9 mm) lower than the
rear. Tighten the jam nuts.
0702-0712
0702-0713

Toro TimeCutter Z Series Specifications

General

Brand	Toro
Model	TimeCutter Z Series
Category	Lawn Mower
Language	English