Toro TimeCutter Z Series User Manual

TRANSAXLE
TimeCutter™ Z Service Manual 5 - 17
5
2. Place the bypass valves in the closed
position (operating). With the engine
running, slowly move the directional control
handles through the forward and reverse
directions (5 to 6 times).
3. It may be necessary to repeat steps 1 and 2
until all the air is completely purged from the
system. When the transaxle moves forward
and reverse at normal speed, purging is
complete.
0702-0524

Toro TimeCutter Z Series Specifications

General

Brand	Toro
Model	TimeCutter Z Series
Category	Lawn Mower
Language	English