Toro TimeCutter Z5020 - Machine Stopping and Deck Height Adjustment; Safe Machine Stopping Procedure; Adjusting Mower Deck Height

Toturn,releasethepressureonthemotioncontrol
levertowardthedirectionyouwanttoturn.
Tostop,pushthemotioncontrolleverstoneutral.
StoppingtheMachine
Tostopthemachine,movethemotioncontrolleversto
neutralandoutwardtotheparkposition,disengagethe
bladecontrolswitch,ensurethethrottleisinthefast
position,andturntheignitionkeytooff.Rememberto
removethekeyfromtheignitionswitch.
Childrenorbystandersmaybeinjuredifthey
moveorattempttooperatethemowerwhileit
isunattended.
Alwaysremovetheignitionkeyandmovethe
motioncontrolleversoutwardtothepark
positionwhenleavingthemachineunattended,
evenifjustforafewminutes.
AdjustingtheHeightofCut
UsingtheHeightofCutLever
Toadjusttheheightofcut,pullinwardanduponthe
leverandmoveittothedesiredposition.
Toraisethedecktothetransportpositionmove
thelevertothecuttingheightpositionG(alsothe
4-1/2inch[115mm])(Figure18).
G009619
1
2
3
4
5
6
7
8
Figure18
1.Height-of-cutlever5.3inch(76mm)
2.4.5inch(115mm),
Transportposition
6.2.5inch(64mm)
3.4inch(102mm)7.2inch(51mm)
4.3.5inch(89mm)8.1.5inch(38mm)
20