Toro TransPro 200 - Checking the Torque of the Wheel Lug Nuts

CheckingtheTorqueofthe
WheelLugNuts
ServiceInterval:Aftertherst10hours
Torquespecication:108N⋅m(80ft-lb)
Checkthetorqueofthewheellugnutseachtime
youinstallthewheelsandaftertherst10hoursof
operation.
Torquethewheellugnutsinthepatternasshownin
Figure34tothespeciedtorque.
WARNING
Failuretomaintainpropertorquecouldresult
infailureorlossofwheelandcouldresultin
personalinjury.
Torquethewheellugnutstothespecied
torque.
g274650
Figure34
CheckingtheStopGap
Rail-LoadingKitOnly
ServiceInterval:Yearly
Withtherampssecuredintheraisedposition,check
thegapmeasurementbetweenthestopandbottom
oftherail.
Theappropriatemeasurementshouldbe2.5mm(0.1
inch)asshowninFigure35.Ifyouobserveadifferent
measurement,adjusttheturnbuckleandjamnutuntil
youreachtheappropriatemeasurement.
g348160
Figure35
1.Rail
3.Stop
2.Gap—2.5mm(0.1inch)
16