Workman 1100/2100/2110 Drive TrainPage 5 – 21
1. Flange bolts
2. Axle bracket
3. Axle case
Figure 30
1
2
3
E. Remove three flange bolts securing the axle
bracket and axle case to each case. Separate brack-
et from each axle case.
1. Flange bolt 2. Flange nut
Figure 31
2
1
F. With the input shaft side down, loosen and re-
move flange bolts and nuts securing the case (RH)
and case (LH) together.
Drive
Train
To Next Page
Loading...
