Toro Workman HD Series - Page 102

Workman HD SeriesPage 6 − 32Drive Train
27.Disassemble fork shaft assemblies:
A. Remove lock pin from 2nd−3rd fork shaft assem-
bly.
B. Note or mark mating shafts and forks for as-
sembly.
C. Remove shift fork from fork shaft.
D. Remove lock pin from 1st−R fork shaft assembly.
E. Remove shift fork from fork shaft.
1. Lock pin
2. Shift fork
3. Fork shaft
Figure 49
28.Disassemble Hi−Lo fork shaft assembly:
A. Remove shift fork, steel ball and spring from Hi−
Lo shift fork assembly.
B. Remove E−ring.
1
5
4
2
3
1. Shift fork
2. Steel ball
3. Spring
4. E−ring
5. Hi−Lo fork shaft
Figure 50
Drive Train