Toro Workman HD Series - Page 111

Workman HD Series Page 6 − 41 Drive Train
6. Assemble Hi−Lo fork shaft:
A. Install E−ring onto fork shaft.
B. Insert spring and steel ball into fork.
C. Insert fork shaft into fork. Put moly disulfide
grease onto the shaft before installing.
1
5
4
2
3
1. Shift fork
2. Steel ball
3. Spring
4. E−ring
5. Hi−Lo fork shaft
Figure 70
7. Assemble R−1 and 2−3 fork shaft:
A. Insert R−1 fork shaft into R−1 fork.
B. Drive lock pin into fork and fork shaft. Pay atten-
tion to direction of slit in lock pin.
C. Insert 2−3 fork shaft into 2−3 fork.
D. Drive lock pin into fork and fork shaft. Pay atten-
tion to direction of slit in lock pin.
1. Lock pin
2. Shift fork
3. Fork shaft
Figure 71