Toro Workman HD Series - Page 134

Workman HD SeriesPage 6 − 64Drive Train
4. Assemble PTO output shaft:
A. If bearing was removed, use a press to install
bearing onto output shaft.
B. Install washer and retaining ring.
C. Install retaining ring and gear.
D. Use a press to install bearing.
1
2
3
7
6
4
5
1. Bearing
2. Gear
3. Retaining ring
4. Retaining ring
5. Thrust washer
6. Bearing
7. Output shaft
Figure 132
1. Bearing
2. Gear
3. Retaining ring
4. Retaining ring
5. Thrust washer
6. Bearing
7. Output shaft
Figure 133
5. Use a press to install bearing onto intermediate
shaft.
1
1. Bearing
Figure 134