Toro Workman HD Series - Page 95

Workman HD Series Page 6 − 25 Drive Train
10.Remove main shaft assembly together with fork
shaft assembly from transaxle case.
1
2
1. Main shaft assembly 2. Fork shaft assembly
Figure 30
11.Remove, all at the same time, reduction shaft as-
sembly, 2nd−3rd shift assembly, countershaft assembly
and High−Low shift assembly.
1
2
4
3
1. Reduction shaft
assembly
2. 2
nd
−3rd shaft assembly
3. Countershaft assembly
4. High−Low shift assemb
ly
Figure 31
12.Loosen flange head screws and remove L.H. axle
shaft assembly and shims from L.H. side cover still at-
tached to transaxle.
1. Flange head screw (5)
2. L.H. axle shaft assembly
3. Shims
4. L.H. Side cover
Figure 32