Toro Workman HDX 07384 - Replacing the Hydraulic Filter

13.Checkthehydraulic-uidlevelandreplenishit,
ifrequired.
Important:Useonlythehydraulicuidspecied.
Otheruidscoulddamagethesystem.
ReplacingtheHydraulicFilter
ServiceInterval:Aftertherst10hours—Replace
thehydrauliclter.
Every800hours—Replacethehydrauliclter.
Important:Useofanyotherltermayvoidthe
warrantyonsomecomponents.
1.Parkthemachineonalevelsurface.
2.Engagetheparkingbrake.
3.Shutofftheengineandremovethekey.
4.Cleantheareaaroundthelter-mountingarea.
5.Placeadrainpanunderthelterandremove
thelter(Figure73).
g010332
Figure73
1.Hydrauliclter2.High-owhydrauliclter
6.Lubricatethegasketonthenewlter.
7.Ensurethattheltermountingareaisclean.
8.Screwthelteronuntilthegasketcontactsthe
mountingplate,andtightenthelter1/2turn.
9.Starttheengineandletitrunforabout2minutes
topurgeairfromthesystem.
10.Shutofftheengineandcheckthehydraulic-uid
levelandforleaks.
57