Toro Workman Topdresser 1800 - Hydraulic System Maintenance; Hydraulic System Safety; Checking the Hydraulic Lines and Hoses; Brush Maintenance

HydraulicSystem
Maintenance
HydraulicSystemSafety
•Seekimmediatemedicalattentionifuidisinjected
intoskin.Injecteduidmustbesurgicallyremoved
withinafewhoursbyadoctor.
•Ensurethatallhydraulic-uidhosesandlinesare
ingoodconditionandallhydraulicconnections
andttingsaretightbeforeapplyingpressureto
thehydraulicsystem.
•Keepyourbodyandhandsawayfrompinhole
leaksornozzlesthatejecthigh-pressurehydraulic
uid.
•Usecardboardorpapertondhydraulicleaks.
•Safelyrelieveallpressureinthehydraulicsystem
beforeperforminganyworkonthehydraulic
system.
CheckingtheHydraulic
LinesandHoses
ServiceInterval:Beforeeachuseordaily
Checkthehydrauliclinesandhosesforleaks,kinked
lines,loosemountingsupports,wear,loosettings,
weatherdeterioration,andchemicaldeterioration.
Makeallnecessaryrepairsbeforeoperating.
BrushMaintenance
CheckingtheBrushfor
PositionandWear
ServiceInterval:Every40hours
Brushmustmakeenoughcontactwithconveyorbelt
todispersetop-dressingmaterialbutnotrestrictthe
rotationofthebrush.Apieceofstiffpapercanbe
insertedbetweentheconveyorbeltandthebrushto
checktheadjustment.
1.Insertapieceofstiffbetweentheconveyorbelt
andthebrushtochecktheadjustment.
2.Checkthatthebrushissameheightfromside
toside.
3.Checktheconditionofthebrushbristles.
Ifthebristlesareexcessivelywornreplacethe
brush.Ifthebristlesarewornuneveneither
replacethebrushoradjustthebrushposition;
refertoAdjustingtheBrushPosition(page26).
AdjustingtheBrush
Position
Note:Ifyouareusingmoisttop-dressingmaterial,
youmayneedtoadjustthebrushpositionsothatthe
bristleswillwhiskmaterialfrombetweenconveyorbelt
lugswithoutexcessivelycontactingsmoothportion
ofbelt.
1.Loosennutsthatsecurethebearinghousing
(Figure40)torightsideofmachine.
g012657
Figure40
1.Bearinghousing
2.Loosennutsthatsecurethebrushmotor(Figure
41)toleftsideofmachine.
26