T owing a T railer
The machine is capable of pulling trailers and
attachments. Contact your authorized T oro distributor
for the available tow hitches.
Y our machine can tow trailers with a maximum gross
trailer weight (GTW) up to 1 13 kg (250 lb).
Do not exceed 22 kg (49 lb) of tongue weight on the
tow hitch of the machine.
When hauling cargo or towing a trailer , do not overload
the machine or trailer . Overloading can cause poor
performance or damage to the hydraulic-drive units,
tires, and frame.
1. Park the machine on a level surface, disengage
the blade-control switch (PT O), and engage the
parking brake.
2. Shut of f the engine, remove the key , and wait
for all moving parts to stop before leaving the
operating position.
3. Insert the hitch ball mount into the receiver
located at the rear of the machine.
4. Insert the hitch pin through the hole in the
receiver and the hitch ball mount.
5. Secure the hitch using the hairpin cotter .
g414986
Figure 40
34
To Next Page
Loading...
Need help?
General
