To Next PageTo Next PageWhat to do if my Toro Z Master 74925TE won't drive?
If your Toro Lawn Mower isn't driving, check if the bypass valves are not closed tight and tighten them. Also, the pump belt could be worn, loose, or broken, or off a pulley, in which case change the belt. The idler spring might be broken or missing, so replace the spring. The hydraulic-fluid level might be low or too hot, so add hydraulic fluid to reservoirs or let it cool down.
What to do if Toro Z Master 74925TE produces an uneven cutting height?
If your Toro Lawn Mower is producing an uneven cutting height, consider these potential causes: 1. The blades might not be sharp enough, so sharpen them. 2. The cutting blades could be bent, in which case you should install new ones. 3. The mower deck may not be level; level it from side-to-side and front-to-rear. 4. The underside of the mower might be dirty, so clean it. 5. Check and adjust the tire pressure to the correct levels. If the blade spindle is bent, contact an Authorized Service Dealer.
General| Brand | Toro |
|---|---|
| Model | Z Master 74925TE |
| Category | Lawn Mower |
| Language | English |
