Toro Z Master G3 3000 Series - Right Park Brake Cable Installation (2011 & Prior)

CHASSIS
3-29Toro Z Master G3 3000/5000/6000 Series Service Manual
3
10. Squeeze the tabs on the brake cable snap tting and
remove the brake cable from the slot on the side of
the frame (Fig. 106).
Fig. 106 PICT-9092a
Right Park Brake Cable Installation (2011 &
Prior)
Fig. 107 PICT-9092a
2. Position the brake cable clevis to the brake lever
assembly. Install a clevis pin through the brake cable
clevis and the brake lever assembly (Fig. 108).
Fig. 108 PICT-9099a
1. Install the brake cable snap tting into the slot
located on the side of the frame (Fig. 107).