Toro Z Master G3 3000 Series - Left Park Brake Cable Installation (2012 & Later)

CHASSIS
3-37Toro Z Master G3 3000/5000/6000 Series Service Manual
3
Left Park Brake Cable Installation (2012 &
Later)
1. Install brake cable with the clevis end out toward the
park brake handle (Fig. 134).
Fig. 134 DSCN-4358a
2. Install the brake cable grooved tting into the slot on
the bottom of the brake pivot assembly and install
e-ring (Fig. 135).
Fig. 135 DSCN-4335a
4. Install two screws and spacers through the park
brake handle and tighten the assembly to the frame
(Fig. 137).
Fig. 136 DSCN-4330a
Fig. 137 DSCN-2619a
3. Install the clevis pin through the clevis end of the
brake cable to the park-brake handle assembly and
install a cotter pin (Fig. 136).