Toro Z Master Professional 3000 Series - Drive System Adjustments and Checks; Adjusting Machine Tracking; Tire Pressure Maintenance

g008943
Figure62
1.ROPSknob(locked
position)
3.Rollbarintheupright
position
2.PulltheROPSknobout
androtateit90°tochange
therollbarposition.
4.Rollbarinthefolded
position
AdjustingtheTracking
1.Disengagetheblade-controlswitch(PTO).
2.Drivetoanopenatarea,movethe
motion-controlleverstotheNEUTRAL-LOCK
position.
3.Movethethrottlemidwaybetweenfastandslow.
4.Movebothmotion-controlleversalltheway
forwarduntiltheybothhitthestopsintheT-slot.
5.Checkwhichwaythemachinetracks.
6.Ifittrackstotheright,loosentheboltsandadjust
theleftstopplatebackwardontheleftT-slot
untilthemachinetracksstraight(Figure63).
7.Ifittrackstotheleft,loosentheboltsandadjust
therightstopplatebackwardontherightT-slot
untilthemachinetracksstraight(Figure63).
8.Tightenthestopplate(Figure63).
g010153
Figure63
Leftcontrollevershown
1.Controllever3.Stopplate
2.Bolt
CheckingtheTirePressure
ServiceInterval:Every50hours/Monthly(whichever
comesrst)
Maintaintheairpressureinthereartiresat90kPa
(13psi).Uneventirepressurecancauseunevencut.
Checkthetireswhentheyarecold,togetthemost
accuratepressurereading.
Note:Thefronttiresaresemi-pneumatictiresanddo
notrequireairpressuremaintenance.
46