Toro Z Master Professional 7500-D Series - Changing the Wing Deck Bushings; Press and Hold the Top of the Deck-Control; Switch; the Center Deck will Raise First, then the; Wing Decks

ChangingtheWingDeck
Bushings
1.Disengagetheblade-controlswitch(PTO),move
themotion-controlleverstotheNEUTRAL-LOCK
position,andengagetheparkingbrake.
2.Shutofftheengine,removethekey,andwait
forallmovingpartstostopbeforeleavingthe
operatingposition.
3.Removeandretaintheclevispinsandhairpin
cottersfromeachwingdeckstoragelocation.
4.Ensurethatallpersonsareclearofthedeck
wings.
5.Pressandholdthetopofthedeck-control
switch;thecenterdeckwillraiserst,thenthe
wingdecks.
6.Secureeachwingdeckintheuprightposition
usingtheclevispinsandhairpincotters.
7.Loosentheboltsthatsecuretheupperpivot
pinstothedeckbutdonotremovethebolts
(Figure83).
g351285
Figure83
1.Frontpivotpin2.Rearpivotpin
8.Removeandretaintheclevispinsandhairpin
cottersfromeachwingdeck.
Removetheheight-of-cutpinfromthedeck-lift
plateontherightsideofthecenterdeck.
9.Lowerthewingdecks,butdonotdrawthem
intotheoperatingposition.
10.Removeandretaintheleftandrightwingdeck
beltshieldlynchpins,beltshield,andwingdeck
belts.
11.Removeandretainthelockingcotterpinsand
cylinderpinsthatattachtotherodendofthe
deck-foldcylindersandwingdecks(Figure84).
Note:Donotpullthewingdecksintothe
operatingpositioninordertoremovethecylinder
pins.
g350948
Figure84
1.Cylinderrodend3.Cylinderpin
2.Cotterpin
12.Removeandretaintheboltsthatsecurethe
upperpivotpinstothedeckandthenremove
thepivotpins(Figure85).
g351309
Figure85
1.Upperpivotpins3.Pulloutward
2.Bolt
4.Leftwingdeck
13.Pullthewingdeckoutwardtoseparateitfrom
thecenterdecksection(Figure85).
14.Removetheangedbushingsfromtheupper
pivotpointsandcleanthebore(Figure86).
71