What to do if my Toro Z Master Professional 7500-D starter does not crank?
If the starter on your Toro Lawn Mower isn't cranking, try the following: disengage the blade-control switch, engage the parking brake, move the motion-control levers outward to the NEUTRAL-LOCK position, and sit on the operator’s seat. Also, ensure the battery is charged, check the electrical connections for good contact, and replace the fuse.
General| Horsepower | 37 HP |
|---|---|
| Fuel Capacity | 12 gallons |
| Spindle Design | Maintenance-free |
| Transmission | Hydrostatic |
| Turning Radius | Zero-turn |
| Operator Platform | Suspended operator platform |
| Blade Tip Speed | 18, 500+ ft/min |
| Cutting Width | 72 inches |
| Deck Construction | 7-gauge steel |
| Warranty | 3-year limited |
Emphasizes following instructions, keeping area clear, and proper operation.
General safety precautions for performing maintenance on the machine.
Lists maintenance tasks by service interval for optimal machine upkeep.
Procedures for servicing the engine, including air cleaner and oil.
Covers draining the water separator and checking fuel lines.
Details safety and procedures for battery charging and fuse servicing.
Covers seat belt check, tracking adjustment, tire pressure, and lug nuts.
Covers safety, fluid level checks, and fluid/filter changes.
Includes blade safety, servicing, leveling, and bushing checks.
To Next Page
