Toro Z MASTER Z500 series - Checking and Adjusting the Blower Latch; Greasing the Idler Arm and Handle Pivot

6.InstallthespringasshowninFigure34.
g003638
Figure34
1.Spring-loadedidlerpulley
3.Long-hookend
2.Short-hookend
7.Pullbackonthespring-loadedidlerpulleyand
installthebeltontothespring-loadedidlerpulley
(Figure33).
CheckingandAdjustingthe
BlowerLatch
Closetheblowerassemblytoseeifthelatchesare
adjustedcorrectly.Loosenortightentheboltssothe
latchesrmlyholdtheblowerassemblyagainstthe
mowerdeckbutcanbereleasedbyhand.
g003400
Figure35
1.Latch3.Blowerassembly
2.Bolt
GreasingtheIdlerArmand
HandlePivot
ServiceInterval:Every50hours—Greasetheidler
arm.
Every100hours—Greasethehandlepivot.
Greasetheblowerbeltidlerarm(Figure36).
g003455
Figure36
Greasethehandlepivot(Figure37).
g009229
Figure37
24