Toro Z MASTER Z500 series - Sizing the Upper Tube for 152 CM (60 Inch) Mowers with Gas Engines; Installing the Discharge Tubes

8
SizingtheUpperTubefor
152cm(60inch)Mowers
withGasEngines
Partsneededforthisprocedure:
1Uppertube
Procedure
Note:Thisprocedureisfor152cm(60inch)mowers
withgasenginesonly.
1.Measureup89mm(3-1/2inches)fromthe
bottomoftheuppertube.Usetheexisting3
holesasmarksandthenmarkitinseveral
placestocreatealinearoundthetube(Figure
18).
2.Cutthe89mm(3-1/2inches)offtheuppertube
(Figure18).
Note:Noticethethreeindentationsinthetube.
Thisiswhereholeswillbedrilledinthefollowing
procedure.
g003391
Figure18
1.Indentationsfordrilling
holes
4.Usetheexistingholesto
createaline
2.Uppertube5.Linetocuttube
3.Cutoff89mm(3-1/2
inches)for152cm(60
inch)mowerswithgas
enginesonly
9
InstallingtheDischarge
Tubes
Partsneededforthisprocedure:
1Uppertube
1Lowertube
3
Bolt(#10x3/4inches)
3
Locknut(#10)
3
Washer(7/32inch)
Procedure
Important:Makesurethatthemowerdeckisin
thelowestheight-of-cutpositionwhileinstalling
thedischargetubes.
13