Toro Z MASTER Z500 series - Page 14

Note:Remembertoreplacethegrassdeectorwhen
thebaggerisremovedfromthemower.Referto
InstallingtheGrassDeector(page27).
1.DisengagethePTOandsettheparkingbrake.
2.Stoptheengine,removethekey,andwait
forallmovingpartstostopbeforeleavingthe
operatingposition.
3.Lowerthemowerdecktothelowestheight-of-cut
position.
4.Installtheuppertubeintothebaggeropening
andpullitbackoutsothattherubbersealis
protrudingout(Figure19).
g009223
Figure19
1.Uppertube3.Baggerhood
2.Baggeropening
5.Measurethedistancethetubeisinsidethe
hood.
Note:Measurefromthehoodplatetotheedge
ofthetubeasshowninFigure20.Thisdistance
needstobe19mm(3/4inch).
g003388
Figure20
1.Hoodplate
4.19mm(3/4inch)
2.Uppertube
5.Edgeoftube
3.Hoodinthedownposition
6.Oncethe19mm(3/4inch)measurementhas
beenachieved,marktheuppertubeonthe
outsidewheretherubbersealprotrudesout
(Figure21).
Note:Thisismarkedtoensurethecorrect
positionfortheuppertubewhendrillingthe
holesandconnectingtheupperandlowertubes.
Note:Therubbersealmustprotrudeoutfrom
thebaggerhood.
g003393
Figure21
1.Uppertube3.Baggerhood
2.Rubbersealprotrudingout4.Markhereagainstthe
rubberseal.
14