11
Dealer
Initial
Customer
Initial
Check Procedure
Show the customer where the following features are located and how they function:
• Fuel Tank Caps
• Oil Fill Tube/ Oil dipstick
• Oil Filter
• Oil Drain
• Fuel Filter
• Air Filter
• Radiator Coolant (Liquid Cooled Only)
• Hydraulic fluid reservoir
• Hydraulic filter
• Battery
• Ignition Switch
• Throttle Lever
• Glow plug light and Water in Fuel Light
• Power Take Off Switch (PTO)
• Motion Control Levers
• Parking Brake
• Mower Height–of–Cut Lever
• Lift Assist Lever
• Z Stand
• Adjustable Seat
• Hydraulic Bypass
• Rollover Protection System (ROPS)
• Flow Baffle
Refer to the operator’s manual to point out safety procedures, operation, and
maintenance procedures.
Review the warranty statement as shown in the
Operator’s Manual
.
Describe the post sale service procedures for your store.
Assist the customer in filling out and mailing the registration card or register online at
www.Toro.com.
Make sure that the customer receives the
Operator’s Manual
,
Parts Catalog
, and
Engine
Owner’s Manual, Set Up Instructions
, and safety video.
Assist the customer in loading the mower.
Note: When you, the dealer representative, have finished delivering the machine to the customer, sign and date
in the space provided below and keep a copy of this page for dealer records:
Signature: Date:
Signature: Date:
To Next Page
Loading...
