Toro Z Master Z597-D - Wheels

4
8. Tighten the front
handles against the
center roll bar ends.
m–7406
Step
4
Installing the Drive Wheels
Parts needed for this step:
Qty. Part
2 Rear wheels
Procedure
1. Mount the wheels
with the valve stem to
the outside and secure
them with the nuts
previously removed in
Step 1.
2. Torque the nuts to
95 ft-lb (128 N⋅m).
m–6859
Step
5
Checking the Tire Pressure
Parts needed for this step:
None
Procedure
1. Check the air
pressure in the front and
rear tires.
Pressure: 13 psi
(90 kPa)
2. Remove the jack
stands and lower the
machine.
m–6873