Toro Z580-D Z Master 74266 - Starting and Stopping the Engine

Figure11
1.Parkingbrake-ON3.BrakeStop
2.Parkingbrake-OFF
StartingandStoppingthe
Engine
StartingtheEngineinNormalWeather
1.RaisetheROPSupandlockintoplace,sitonthe
seatandfastentheseatbelt.
2.Movethemotioncontrolstotheneutrallocked
position.
3.Settheparkingbrake;refertoSettingtheParking
Brake.
4.MovethePTO(powertakeoff)switchtotheoff
position(Figure12).
5.Movethethrottlelevertothemiddleposition
(Figure14).
6.Turntheignitionkeyclockwisetotherunposition
(Figure13).
7.Pushtheglowplugswitchfor10seconds.Thelight
willturnon.
8.Releasetheswitchafter10seconds.Thelightwill
turnoff.
Figure12
1.Hourmeter5.EngineT emperaturelight
2.Ignitionswitch6.Throttlecontrol
3.Glowplugswitch7.PTOSwitch
4.Glowpluglight
9.Turnthekeytothestartpositionandtheglowplug
indicatorlightwillcomebackon.Whentheengine
starts,releasethekey(Figure13).
Important:Usestartingcyclesofnomorethan
30secondsperminutetoavoidoverheatingthe
startermotor.
10.Iftheenginedoesnotstartimmediately,movethe
throttlecontroltofastandturnthekeytothestart
position.
Note:Additionalstartingcyclesmayberequired
whenstartingtheengineforthersttimeafterthe
fuelsystemhasbeencompletelywithoutfuel.
Figure13
1.Ignitionswitch3.Run
2.Off4.Start
19