Toro Z580-D Z Master 74266 - Servicing the Fuses

Important:Alwayskeepthebatteryfullycharged
(1.265specicgravity).Thisisespeciallyimportant
topreventbatterydamagewhenthetemperatureis
below32°F(0°C).
1.Makesurethellercapsareinstalledinbattery.
Chargebatteryfor10to15minutesat25to30amps
or30minutesat10amps.
2.Whenthebatteryisfullycharged,unplugthecharger
fromtheelectricaloutlet,thendisconnectthe
chargerleadsfromthebatteryposts(Figure49).
3.Installthebatteryinthemachineandconnectthe
batterycables,refertoInstallingtheBattery.
Note:Donotrunthemachinewiththebattery
disconnected,electricaldamagemayoccur.
Figure49
1.PositiveBatteryPost
3.Red(+)ChargerLead
2.NegativeBatteryPost
4.Black(-)ChargerLead
ServicingtheFuses
Theelectricalsystemisprotectedbyfuses.Itrequires
nomaintenance,however,ifafuseblowscheck
component/circuitformalfunctionorshort.
1.Unlatchtheenginehoodandraisetheenginehood
togainaccesstofuseholder(Figure50).
2.Toreplacethefuses,pulloutonthefusetoremove
it.
3.Installanewfuse(Figure50).
Figure50
1.Ignition-30amp(F1)3.Clutch-10amp(F3)
2.Radiatorfan-40amp(F2)4.Leftsidefueltank
40