To Next PageTo Next Page
Need help?Do you have a question about the toscano TPM7-POOL and is the answer not in the manual?
Essential precautions before adjusting, installing, or operating the equipment.
Equipment not designed for life safeguarding; follow local safety procedures.
Dangers of contact with electrical current and high voltage.
Periodic maintenance and qualified personnel handling required.
Disclaimer for unauthorized modifications.
Description of the connection terminals on the TPM7-POOL unit.
Explanation of the status indicator lights on the TPM7-POOL unit.
Connection diagram for a single-phase power supply.
Connection diagram for single-phase with a contactor.
Connection diagram for a three-phase power supply.
Step-by-step guide for setting the device's internal clock.
Guide to setting ON/OFF times for filtration cycles.
Guide to setting ON/OFF times for lighting cycles.
Instructions on how to cancel an active program.
Steps to manually turn pool lighting on or off.
View unit identification, working hours, and start counts.
Procedure for auto-adjusting pump during initial startup.
How overload protection works and how to reset it.
Mechanism to prevent impeller failure from inactivity.
Use external input to start or pause the pump.
Use external input to turn lights on or off.
How to change lighting color via 3-second press.
Procedure to stop pump for refilling balance tank.
How heat pump contact integrates and display indication.
How the temperature probe enables frost protection.
How auxiliary relay works with pump output.
Connecting external Tpool modules via RJ11.
Details on power supply, pump output, and lighting output.
Auxiliary relay capacity and terminal cross-section.
Operating temperature range and relevant directives.
Steps to download, install, and pair the TPOOL app.
App interface overview for control and settings.
Essential precautions before adjusting, installing, or operating the equipment.
Equipment not designed for life safeguarding; follow local safety procedures.
Dangers of contact with electrical current and high voltage.
Periodic maintenance and qualified personnel handling required.
Disclaimer for unauthorized modifications.
Description of the connection terminals on the TPM7-POOL unit.
Explanation of the status indicator lights on the TPM7-POOL unit.
Connection diagram for a single-phase power supply.
Connection diagram for single-phase with a contactor.
Connection diagram for a three-phase power supply.
Step-by-step guide for setting the device's internal clock.
Guide to setting ON/OFF times for filtration cycles.
Guide to setting ON/OFF times for lighting cycles.
Instructions on how to cancel an active program.
Steps to manually turn pool lighting on or off.
View unit identification, working hours, and start counts.
Procedure for auto-adjusting pump during initial startup.
How overload protection works and how to reset it.
Mechanism to prevent impeller failure from inactivity.
Use external input to start or pause the pump.
Use external input to turn lights on or off.
How to change lighting color via 3-second press.
Procedure to stop pump for refilling balance tank.
How heat pump contact integrates and display indication.
How the temperature probe enables frost protection.
How auxiliary relay works with pump output.
Connecting external Tpool modules via RJ11.
Details on power supply, pump output, and lighting output.
Auxiliary relay capacity and terminal cross-section.
Operating temperature range and relevant directives.
Steps to download, install, and pair the TPOOL app.
App interface overview for control and settings.
General| Type | Control Unit |
|---|---|
| Model | TPM7-POOL |
| Manufacturer | Toscano |
| Supply voltage | 230V AC |
| Frequency | 50/60 Hz |
| Storage temperature | -20°C to +70°C |
| Operating temperature | -10°C to +55°C |
