Toshiba 24P1300 Series - Pedestal Stand Assembling

– 2 –
Pedestal stand Assembling
CAUTION: Before beginning pedestal assembly, carefully lay the front of the LCD Panel face down on a  at,
cushioned surface such as a quilt or blanket. Leave the bottom of the unit protruding over the edge of the
surface and assemble as indicated.
Note:
Extreme care should always be used when attaching the pedestal stand to avoid damage to the LCD panel.
24P1300Series models
29P1300Series models / 32P1300Series models
M4 × 4
1
4
3
2
Warning: Ensure the power cable is not pinched
when attaching the pedestal stand as this could
cause an electric shock.
M5 × 2
M4 × 4
242932P1300SeriesEn.indd2242932P1300SeriesEn.indd2 2013/04/0810:07:002013/04/0810:07:00