Adjusting the picture
Adjusting the picture quality
You can adjust the picture's contrast, brightness, shapness, color, and
tint. _mr picture qu_ity adjustments are stored automatically in the
"l_V'smemory. You can keep these settings or choose preset options in
the PREFERENCE menu (see "Selecting the color temperature"
below, and "Adjusting the picture preference" on the next page.)
To adjust the picture quality:
1. Press MENU.
2. Press < or _ to highlight the PICTURE menu.
3. Press A or T until the quality you want to adjust is highlighted.
Note:
Toreset thepicture (and audio)
adjustments to the factorysettings,
selectRESETin the PICTUREmenu.
4. Press < or I_to adjust the level, as described in the R)llowing table:
RECALL
0
®
®
Q
@
MUTE POWER
®
®®
®®
®®
®o6,
Contrast Lower Higher
Brightness Darker Lighter
Sharpness Softer Sharper
Color Paler Deeper
Tint Reddish Greenish
Selecting the color temperature
Change the picture quality by selecting from three preset color
temperatures--cool, medium, and warm--as described in the
following table:
Cool Blueish
Medium Neutral
Warm Reddish
To select the color temperature:
1. Press MENU.
2. Press < or _.to highlight the PREFERENCE menu.
3. Press A or T to highlight COLOR TEMPERBSFURE.
4. Press < or _ to highlight the mode you prefer.
<,_÷i\.y ...............
_REFERENCE
28
To Next Page
Loading...
