Adjusting the sound quality
_m can change the sound quality of your TV by adjusting the bass,
treble, and balance.
To adjust the sound quality:
1. Press MENU.
2. Press < or _ m highlight the AUDIO menu.
3. Press at or T m highlight the quality you _nt to adjust (BASS,
TREBLE, or BALANCE).
4. Press < or _ m adjust the level:
• < makes the sound quality weaker or decreases the b_ance in
the right channel, depending on the item selected.
• I_makes the sound quality stronger or decre&ses the balance in
the left channel, depending on the item selected.
AUDIO
_OVI_ [ v A] ADaUgT[ 4 I,]
Using the surround sound feature
The surround round fc_ttureexpands the audio listening fidd ,_4der and
deeper m create exception_ sound qu_ity from the TV spcv,kers.
"l_is feature uses stere() sign's from a'l_V broadc&st or vide() h_put.
To turn the surround sound feature on:
1. Press MENU.
2. Press < or _ m highlight the AUDIO menu.
3. If you have not already done so, select STEREO mode (press at or
to highlight MTS, and then press < or _ m highlight STR).
4. Press at or _ m highlight SURROUND.
5. Press < or _ m highlight ON.
AUDIO
III [i :|filial I_1 I{I|_1 !11 =
F_,_/@r_
MOVE[_] SELECT [4 I']
Note:
Toresetthe audio adjustments(bass,treble,
and balance) to the factorysettings,select
RESETin the PICTUREmenu (see page28).
RECALL@ MUTE@ _R
®®®
®®®
@®®
-- MENU
,t,i, < b
To turn the surround sound feature off:
Highlight OFF in step 5 above. Note: In general, you can leave the
surround sound feature on because the "I_Vautomatically outputs the
type of sound being bmadc&st (surround stere() or mono).
32