Toshiba 27AF42 - Audio Output Options

Selecting variable audio OUT
If you connect external audio equipment (such _ a stereo,
audio amplifier, or surround sound system) to the "KV'sAudio OUT
jack, you can use the AUDIO OUT feature m select either variable or
fixed audio output.
- If you set AUDIO OUT m VARIABLE, you c,-muse the w)lume
controls on either the "KV or the audio equipment m adjust the
sound level coming through the audio equipment.
- If you set AUDIO OUT to FIXED, you must use the w)lume
controls on the audio equipment m adjust the sound level coming
through the audio equipment (the "KV'svolume setting will have
no effect).
Note: Fixed audio output provides a cleaner signal than variable audio
output.
See page 11 for details on connecting an audio amplifier m the "KV_
Audio OUT jack.
To select variable audio output:
1. Press MENU.
2. Press < or _ to highlight the AUDIO menu.
3. Press • or T m highlight AUDIO OUT.
4. Press < or _ m highlight VARIABLE.
%
AUDIO
t_OVE[_] 5ELECT [4 _1
To select fixed audio output:
1. Highlight FInD in step 4 above.
Turning off the built-in speakers
Use this feature to turn off the TV's built-in speakers when you
connect external speakers m your'KV (see "Connecting an audio
amplifier" on page 11).
To turn offthe built-in speakers:
1. Press MENU.
2. Press < or _"m highlight the AUDIO menu.
3. Press • or T m highlight SPEA_RS.
4. Press < or _ m highlight OFE
AUDIO
HOVE[_] SELEI_T [4 I_1
To turn on the built-in speakers:
1. Highlight ON in step 4 above.
RECALL
®
®
®
@
MUTE@
®®
®®
®®
-- MENU
AT<_
33