Connecting a DVD player or satellite receiver
and a VCR
"l%is connection ,Mlows you to watch DVD/satellite, VCR, or TV
programs, ,-rod record from the satellite receiver or'l_V. You can record
one "I+Vprogram while ",_atching another "I+Vprogram.
Note: lf ),our DVD playerhas component video connections,follow the
connectioninstructionsunder "Connectinga DVD player with ColorStream_
CcomponentvideQ)and a VCR"onpage 10.
You wiU need:
• one coaxial cable
• three pairs of audio cables (one pair and two single audio cables
l_)ra mono VCR)
• two regular video cables (see notes at right)
• one S-video cable (see notes at right)
DVD / Satellite Receiver
To Satellite
Stereo VCR
Note:
See "NoteRegardingPicture Quality"on
page 7
Youcanuse a regular video cableinsteadof
an S-video cable between the 7Vand DVD
player/satetlitereceiver,but the picture quality
will decrease.7heillustrationat left shows one
S-video cable and onepair of audio cables
connected from the DVD player/satetlite
receiver to Video-l on the TV.
Do not connecta regular videocable an___dan
S-video cable to Video-I (or Video-2) at the
same time. Doing so will causeunacceptable
picture performance.
When recording, set Audio Out to
FIXED Csee "Selecting variable audio
OUT" on page 33J. With Audio Out set
to FIXED, the TV's volume setting will
not affect the sound level being
recorded.
Theunauthorizedrecording,use,
distribution,or revisionof television
programs,videotapes,DVDs,andother
materialsisprohibitedunderthe
CopyrightLaws ofthe UnitedStatesand
other countries, andmay subjectyouto
civilandcriminalliability.
9
To Next Page
Loading...
