Adjusting the sound
Muting the sound
Press MUTE to temporaily turn offthe sound. While the sound is off,
the screen displays the word "MUTE" in the lower right corner. "lb
restore the sound, press MUTE or VOL < _..
When you press MUTE, the Closed Caption feature is automatically
activated. "ib deactivate captions and restore normal sound, press
MUTE _mn. This feature works only when the Closed Caption mode
is set to OFE See "Using the dosed captioned feature" on page 30 for
more information about closed caption settings.
Selecting stereo/SAP broadcasts
"l_e multi-channel TV sound (MTS) feature provides high-fidelity
stere() sound. MTS also cm_transmit a second audio program (SAP)
containing a second langu_e or other audio information.
Note: The MTS feature is not avmlable in VIDEO mode.
In general, you can leave your "I_Vin stereo mode because the TV
automatic_ly outputs the type of sound being broadc&st (stere() or
mono).
When the "I_Vreceives a stere() or SAP broadc&st, the word "STEREO"
or "SAP" displays on-screen every time you turn the "I_Von, change
the channel, or press RECALL.
To listen to stereo sound:
1. Press MENU.
2. Press < or _.to highlight the AUDIO menu.
3. Press A or _r to highlight MTS.
4. Press < or _.to highlight STR (stere()).
Note: If the stere() sound is noisy, select MONO to reduce the
noise.
AUDIO
I'aOVE[vA] SELECT [4 P]
To listen to a second audio program (SAP):
1. Press MENU.
2. Press < or _.to highlight the AUDIO menu.
3. Press i or v to highlight MTS.
4. Press < or _.to highlight SAP.The "I_Vspeakers will output the
second audio program instead of normal audio.
RECALL MUT__ R
®®®
®®®
©®®
MUTE
--RECALL
-- MENU
31
To Next Page
Loading...
