Toshiba 2857DD - Multi Bus E2 PROM Address and Adjusting Table

MULTI BUS E2PROM ADDRESS, ADJUSTING ADDRESS TABLE
QA02 Value of initializing
memory QA02
address i (Hexa-decimal)
Adjusting
method
R CUTOFF (B/W)
G CUTOFF (B/W)
B CUTOFF (B/W)
G DRIVE
B DRIVE
SUB CONTRAST MAX (4:3 MODE)
SUB BRIGHT CEN
SUB COLOR CEN NTSC
SUB TINT CEN
SUB COLOR CEN PAL
SUB COLOR CEN SECAM
SUB COLOR
SUB CONTRAST
VOL SCART
FM VOL PRE SCALE
NICAM VOL PRE SCALE
NICAM THRESHOLD LEVEL
NICAM THRESHOLD LEVEL
IGR THRESHOLD LEVEL
IGR THRESHOLD LEVEL
EXT PRE. VOLUME
NICAM ON LEVEL
NICAM OFF LEVEL
FM ATTENUATOR LEVEL
STEREO SEPARATION
50Hz H-POSITION
V-POSITION
HEIGHT
V-LINEARITY
V-S CORRECTION
V-SHIFT
V-COMPENSATION
PICTURE WIDTH
E-W PARABOLA
E-W CORNER
TRAPEZIUM
H-COMPENSATION
V-F CORRECTION
SECAM BELL FILTER
SECAM R-Y
SECAM B-Y
S ... semi-fixed data area which is fixed by model. (Do not adjust in field service.)
F ... This item may require adjustments by models after initialization, wnen QA02 is replaced.
-16-—-