Toshiba 40L5200U - Displaying TV Status Information

109
Using the TV’s features
Displaying TV status information
Displaying TV status information
To display TV status information using the RECALL button:
❖ Press the RECALL button on the remote control.
The following information will be displayed (if applicable):
❖ Current input (ANT/CABLE, Video, etc.)
❖ If ANT/CABLE is the current input, either “CABLE” (for
cable TV) or “ANT” (for over-the-air broadcasts).
❖ Channel number (if in ANT/CABLE mode)
❖ Digital signal strength indicator (bar graph in lower right
corner of box; for ATSC signals only)
❖ Stereo, Mono, or SAP audio status (when in HDMI
®
input
mode, Dolby Digital, or PCM)
❖ Video resolution
❖ Aspect ratio of incoming video signal (4:3 or 16:9)
❖ V-Chip rating status
❖ GameTimer (if set)
(Sample Illustration) Recall banner
To close the Recall screen, press the RECALL button again.
To display TV status information using INFO:
❖ Press the INFO button.
The following additional information will display for off air digital
channels, if applicable:
❖ Title
❖ Duration