30
Connecting Your TV
REGZA-LINK® connection
REGZA-LINK
®
connection
You can control the basic functions of connected audio/video
devices using the TV’s remote control if you connect a
REGZA-LINK
®
compatible audio receiver or playback device. For
an explanation of setup and operations, see “REGZA-LINK®
playback device (DVD player, etc.) control” on page 105.
(Sample Illustration) Digital audio system connections
To connect an HDMI
®
device, you will need one HDMI
®
cable
(type A connector) per HDMI
®
device (see “Overview of cable
types” on page 22).
❖ If several devices are connected, REGZA-LINK
®
feature may not
operate properly.
❖ For proper operation, it is recommended that you use an HDMI
®
cable with the HDMI
®
Logo ( ).
Before controlling the device(s):
❖ After completing the above connections, configure the
REGZA-LINK
®
Setup menu with the desired settings, see
“REGZA-LINK® input source selection” on page 107.
❖ The connected devices must also be set. For details, see the
operation manual for each device.
❖ The REGZA-LINK
®
feature uses the CEC technology as
regulated by the HDMI
®
standard.
To Next Page
Loading...
