Toshiba 40L5400 Series - Learning About the Remote Control

10
Introduction / Getting started
10 A (aerial input terminal) — Analogue aerial
signal input (- page 8).
11 o PC/HDMI 1 (AUDIO) (input terminal) —
PC audio input terminal is shared with HDMI
analogue audio input terminal, and their use can
be con gured in the PREFERENCES menu (
-
page 33).
12 O DIGITAL AUDIO (OPTICAL) (output
terminal) — For use when connecting an
ampli er with optical type digital audio input
(- page 31).
13 O AUDIO (output terminals) — Standard
audio outputs (FIXED) (- page 31).
14 o RGB/PC (input terminal) — For use when
connecting a personal computer (PC) (- page
33).
15 LAN port — For use when connecting to
network (- page 40).
16 o HDMI 1 (input terminals) — High-
De nition Multimedia Interface input receives
digital audio and uncompressed digital video
from an HDMI device (- page 32).
TV remote control
1
2
4
7
17
13
15
18
10
21
23
22
19
16
12
9
5
6
3
8
20
11
14
1 Power on/Standby
2 Input source selection
3 To select the Intelligent Scene Optimizer mode
4 Picture Mode
5 Sound Mode
6 Stereo/Bilingual selection
7 Number buttons (0-9)
8 To return to the previous programme
9 To access the Channel List
10 Volume – + (These buttons adjust the volume
level.)
11 • To display on-screen information
• Initial/Index function for Teletext
12 Sound Mute (This button turns the sound o /
on.)
13 To access the Quick Menu
14 Programme position U u
15 To access the Menu
16 Teletext on/Superimpose Teletext/o
17 • Menu  
• OK
18 To return to the previous menu
19 EXIT
20 Teletext control buttons (Four coloured buttons:
Red, Green, Yellow, Blue)
21 Subtitle on/o
22 Picture still ( )
23 When using the Media Player (
z Z)
When using the Teletext ( )
Learning about the remote control
32404755L5400SeriesEn.indd1032404755L5400SeriesEn.indd10 2014/07/2417:06:232014/07/2417:06:23