Toshiba 40L5400 Series - Sound Adjustment

24
Using the TV’s features
Using the Power Bass Booster
Power Bass Booster helps to create rich bass.
1 From the Advanced Sound Settings menu,
press  or  to select Power Bass Booster.
2 Press  or  to select Normal, Super or O .
NOTE:
This may not have an e ect, depending on the audio
source.
Resetting the Advanced Sound Settings
This feature resets the Advanced Sound Settings
to the factory settings.
NOTE:
If no sound settings have been changed, Reset is not
available.
1 From the Advanced Sound Settings menu,
press  or  to select Reset, and then press
OK.
2 A con rmation message will appear. Press  or
 to select Ye s , and then press OK.
Using the Audio Distortion Control
Prevents audio distortion.
1 From the SOUND menu, press  or  to select
the Audio Distortion Control.
SOUND
MTS
Dual
Balance
Sound Mode
Advanced Sound Settings
Auto
Auto
Dual 1
Off
Stand
TV Mounting
Dynamic Range Control
0
On
Audio Distortion Control
2 Press  or  to select On or O .
Selecting the TV Mounting (Wall/Stand)
TV Mounting feature can provide an appropriate
sound depending on the TV installation type, that
TV is installed on a wall or a TV stand.
1 From the SOUND menu, press  or  to select
TV Mounting.
2 Press  or  to select Wall or Stand.
Sound adjustment
Adjusting the sound balance
1 From the SOUND menu, press  or  to select
the Balance.
2 Press  or  to adjust the settings as desired.
Using the Sound Mode
Choose your preferred Sound Mode (Auto,
Dynamic, Natural or Clear Voice).
To use the button
1 Press to view the di erent modes available.
To use the Menu
1 From the SOUND menu, press  or  to select
the Sound Mode.
2 Press  or  to select Auto, Dynamic, Natural
or Clear Voice.
Adjusting the sound quality
You can adjust the basic sound quality.
NOTE:
This can be set when Sound Mode is set to Dynamic,
Natural or Clear Voice.
1 From the Advanced Sound Settings menu,
press  or  to select Equaliser, and then
press OK.
2 Press  or  to select Graphic Equaliser, and
then press OK.
3 Press  or  to select a frequency band, and
press the  or  to adjust the level for that
band.
Using the Power Sound Equaliser
1 From the Equaliser menu, press  or  to
select Power Sound Equaliser.
2 Press  or  to select On or O .
Using the Surround
Surround help to create rich and wider sound from
stereo sound sources.
1 From the Advanced Sound Settings menu,
press  or  to select Surround.
2 Press  or  to select On or O .
32404755L5400SeriesEn.indd2432404755L5400SeriesEn.indd24 2014/07/2417:06:262014/07/2417:06:26