Toshiba 40L5400 Series - Selecting Video Input Source

27
Using the TV’s features
Labelling video input sources
These input labels are shown in the input selector.
You can label external inputs according to the
devices you have connected to the TV.
1 From the PREFERENCES menu, press  or 
to select AV Connection and press OK.
2 Press  or  to select Input Labelling and
press OK.
Input
Label
--
--
--
--
--
Input Labelling
EXT 1
EXT 2
HDMI 1
HDMI 2
--
HDMI 3
PC
3 Press  or  to select the item you want to
label and press  or  to select --, Ampli er,
Cable, DVD, Game, PC, Recorder, Satellite or
VCR, or press the RED button to turn on the
skip.
4 Repeat step 3 for other video inputs.
Channel List
1 Press LIST. The Channel List will appear.
Channel List
2
3
4
5
6
7
8
1
2 Press  or  to select a channel, and then
press OK.
Con rming software version
1 From the SETUP menu, press  or  to select
System Information and then press OK.
2 Press OK to display the software version.
NOTE:
The software version displayed is just for the
illustration.
Selecting the video input source to view
1 Press o on the remote control until the video
input mode list appears on the screen, then
press ,  or o to select appropriate input
source (or touch p / o and U or u on the TV
left side panel to select required input source
directly).
TV
Inputs
VIDEO1
VIDEO2
HDMI 1
HDMI 3
HDMI 2
PC
2 Press OK.
VIDEO1 (o (1), COMPONENT/VIDEO INPUT,
standard or component video input) ,
VIDEO2 (o (2), standard video input),
HDMI1, HDMI2 HDMI 3 (HDMI input),
PC (o RGB/PC, PC input)
NOTE:
If the Inputs list is displayed by pressing p / o and U
or u on the left side of the TV and U or u, the options
are TV / VIDEO (1, 2) /HDMI (1, 2, 3).
Setting the Colour System
This feature is available in Standard video
(composite) inputs mode.
1 Press MENU, and then press  or  to display
the SETUP menu.
SETUP
Indonesia
Country
Auto Tuning
Manual Tuning
Quick Setup
System Information
Reset TV
HomeLocation
Auto
Colour System
2 Press  or  to select Colour System, and
then press  or  to select Auto, PAL, SECAM,
NTSC 4.43 or NTSC 3.58.
3 Press OK to store your settings.
NOTE:
Con rm that Colour System is set to “Auto”. If not,
select “Auto” with  or .
32404755L5400SeriesEn.indd2732404755L5400SeriesEn.indd27 2014/07/2417:06:262014/07/2417:06:26